Montréal | Sherbrooke : Tel. : 819-565-3428
370 rue Rodolphe-Racine
Sherbrooke, QC, J1R 0S7, Canada
E-mail: info@aerotecmachinetool.com
http://www.aerotecmachinetool.com
English
Français
 

Victor 2400T/2900T Series

Victor 2980T

SPECIFICATIONS

Models 2400T 2900T
Center height11-7/8" (300 mm) 14-3/4" (370 mm)
Swing over bed23-5/8" (600 mm) 29-1/8" (740 mm)
Swing over gap (Gap type only)32-1/4" (820 mm)37-25/32" (960 mm)
Swing over cross-slide15" (380 mm) 20-1/2" (520 mm)
Distance between centers53" (1,350 mm), 73" (1,850 mm), 115" (2,920 mm), 155" (3,930 mm)
Spindle noseCamlock D1-11
Spindle bore diameter4-1/8" (105 mm)
Taper of spindle bore108 x 1 : 20
Taper of centerM.T. # 5
Spindle speeds25 ~ 1,200 rpm (12 steps)
Cross slide travel13" (330 mm) 18-1/4" (465 mm)
Compound rest travel9" (230 mm)
Max. size cutting tool1" x 1" (25 x 25 mm)
Spindle diameter3-1/32" (77 mm)
Spindle travel7" (178 mm)
Taper of centerM.T. # 5
Bed length102" / 122" / 164" / 205" (2,590 / 3,090 / 4,160 / 5,210 mm)
Bed width16-1/2" (420 mm)
Width of gap20-1/4" (515 mm)
Pitch of leadscrewØ 1-1/2" (38 mm) 4 TPI or 6 mm / pitch
Metric pitch threads0.5 ~ 14 mm x 31 kinds
Inch pitch threads2 ~ 56 TPI x 45 kinds
Module pitch threads0.25 ~ 7 M.P. x 23 kinds
Diametral pitch threads4 ~ 112 D.P. x 43 kinds
Range of longitudinal feeds0.0012" ~ 0.0287"/rev. (0.03 ~ 0.73mm/rev.)
Range of cross feeds0.0004" ~ 0.0118"/rev. (0.01 ~ 0.3 mm/rev.)
Main drive motor20 HP (14.92 kw) 3PH
Rapid traverse motor1/2 HP 3PH
Coolant pump motor1/8 HP 3PH
Approx. net weight7,260/7,744/9,174/10,406 lb 7,590/8,030/9,460/10,670 lb
Approx. gross weight7,700/8,030/9,680/11,000 lb8,030/8,536/9,966/11,440 lb
Packing measurement approx. (L X W X H) 120" / 140" / 181" / 223" x 44" x 74"

. Specifications are subject to change without notice for further design improvements.

STANDARD MACHINE ACCESSORIES

1. Main drive motor 20 HP 1 pc 4. Coolant system 1 set 7. Halogen work light 1 set
2. M.T. #5 dead center 2 pcs 5. Change gears for module & D.P. threading 1 set 8. Repair paint 1 can
3. Chuck cover 1 set 6. Tool box with tool kits 1 set

OPTIONAL MACHINE ACCESSORIES

1. Steady rest 6. Drive plate 11. Work light / Quartz work light
2. Follow rest 7. Rear tool post 12. Full length splash guard
3. 3-jaw scroll chuck 8. Micro carriage stop 13. Taper turning attachment
4. 4-jaw scroll chuck 9. 6-position bed stop 14. Quick change tool post
5. Face plate (Ø 20" or Ø 24") 10. Live center (M.T. #5) 15. 4-position carriage stop

For more information please call AEROTEC


Copyright © 2007 AEROTEC MACHINE TOOL SALES, All right reserved (www.aerotecmachinetool.com)