Victor S2200S/S2600S Series
SPECIFICATIONS
| Models |
S2260S
S2660S |
S2280S
S2680S |
S22100S
S26100S |
S22120S
S26120S |
S22160S
S26160S |
| Swing over bed | 22"
(560mm) |
26" (660mm) |
| Swing over cross slide | 14-1/8"
(360mm) |
18-1/16" (460mm) |
| Swing in gap diameter | 29-3/8"
(745mm) |
33-1/4" (845mm) |
| Length of gap infront of face plate | 6-1/2"
(165mm) (W/D1-11) |
| Center admits between | 60"
(1,524mm) | 80"
(2,032mm) | 100"
(2,540mm) | 120"
(3,048mm) | 160"
(4,064mm) |
| Width of bed | 15-3/4"
(400mm) |
| Motor for spindle | 15HP 3ph |
| Spindle bore | 4-1/8"
(105mm) |
| Spindle nose | D1-11 Camlock |
| Spindle taper in nose/sleeve | M. T. No.8 |
| Speed number | 12 steps |
| Speed ranges | 15 ~ 1,200 rpm |
| Cross slide travel | 12-1/2" (320mm) |
| Compound rest travel | 10"
(255mm) |
| Leadscrew diameter & thread | 1-1/2"
(38 mm) 4 T.P.I. |
| Imperial threads | 2 ~ 112 TPI x 60 Kinds |
| Metric threads | 0.2 ~ 14 mm pitch x 60 Kinds |
| Diametral pitch threads | 4 ~ 112 D.P. x 50 Kinds |
| Module pitch threads | 0.2 ~ 7 M.P. x 50 Kinds |
| Longitudinal feeds imperial/metric |
0.0014" ~ 0.0387" /rev. x 50 Kinds /
0.037 ~ 1.04 mm/rev. x 50 Kinds |
| Cross feeds imperial/metric |
0.0007" ~ 0.01935"/rev. x 50 Kinds /
0.0185 ~ 0.52 mm/rev. x 50 Kinds |
| Quill diameter/travel | 2-15/16" (75 mm) /
6-5/16" (160 mm) |
| Quill taper | M.T. No. 5 |
| Length of machine | 120"
(3,048mm) | 140"
(3,558mm) | 160-1/8"
(4,068mm) | 180-1/4"
(4,578mm) | 200-2/5"
(5,598mm) |
| Width of machine | 50-3/8"
(1,280mm) |
| Machine height | 51-3/8"
(1,305mm) for S22 series |
53-3/8" (1,355mm) for S26 series |
| Packing dimensions | 121"x45"x67" |
140"x45"x67" | 161"x45"x67" |
185"x45"x67" | 223"x45"x67" |
| Net weight | 5,016 lb.
(2,280 kg) /
5,126 lb.
(2,330 kg) | 5,566 lb.
(2,530 kg) /
5,676 lb.
(2,580 kg) | 6,116 lb.
(2,780 kg) /
6,226 lb.
(2,830 kg) | 6,666 lb.
(3,030 kg) /
6,776 lb.
(3,080 kg) | 7,766 lb.
(3,530 kg) /
7,876 lb.
(3,580 kg) |
| Gross weight | 5,566 lb.
(2,530 kg) /
5,676 lb.
(2,580 kg) | 6,160 lb.
(2,800kg) /
6,270 lb.
(2,850 kg) | 6,754 lb.
(3,070 kg) /
6,864 lb.
(3,120 kg) | 7,348 lb.
(3,340 kg) /
7,458 lb.
(3,390 kg) | 8,536 lb.
(3,880 kg) /
8,646 lb.
(3,930 kg) |
*Specifications are subject to change without notice for further design improvement.
STANDARD ACCESSORIES
| 1. Center sleeve M.T. No.5 / No.7 | 5. Leveling screw | 8. Operation manual & parts list |
| 2. Tool box with kits | 6. Thread dial indicator | 9. Coolant system |
| 3. D.P. & M.P. Change gear | 7. Dead center M.T. No. 5 | 10. Work light |
| 4. Rapid feed motor for S22100S (S26100), S22120S (S26120S), & S22160S (S26160S) only |
OPTIONAL ACCESSORIES
| 1. 4 way tool post | 6. Chuck cover (or with micro switch) | 11. Taper turning attachment |
| 2. Quick change tool post | 7. 3" 10" steady rest wit h roller support | 12. Micro saddle stop |
| 3. Rear tool post | 8. Follow rest | 13. 4-position saddle stop |
| 4. 3-jaw scroll chuck | 9. Full length splash guard | 14. Fast lever 5C collet closer |
| 5. 4-jaw independent chuck | 10. Face plate | 15. Live center with replaceable tips |
Victor 2200E Series
For more information please call AEROTEC
|
