| Capacity |
| Diameter of column | 6½" (168mm) |
| Swing | 21½" (550mm) |
| From table to spindle end | Max. 29 ½" (750mm)
Min. 1 3/16" (30mm) |
| From base to spindle end | Max. 44½" (1135mm)
Min. 36" (915mm) |
| Drilling capacity | (S45C) 1½" (40mm),
(FC20) 2" (50mm) |
| Tapping capacity | (S45C) M24, (FC20) M30 |
| Spindle |
| Taper of spindle nose | M.T. No. 4 |
| Spindle stroke | Man. 220, Mech. 180, Tap. 180 |
| Speed (rpm) 50 Hz | 60, 85, 110, 135, 180, 235, 340,
440, 575, 740, 960, 1270 |
| Speed (rpm) 60 Hz | 75, 100, 130, 165, 215, 285, 405,
530, 690, 890, 1150, 1525 |
| Number of spindle speed | 3 |
| Feed rate (mm/rev.) | 0.1, 0.2, 0.3 |
| Table |
| Working area (Diameter) | 20" (510mm) |
| Travel | 19½" (500mm) |
| T-Slot (nominal dimension) | ½" (16mm) |
| Other |
| Spindle Motor | 2 HP |
| Base Mounting Area | 19½" x 35-1/3" (500mmx900mm) |
| Overall Height | 86½" (2200mm) |
| Net Weight | 1,430 lb (650 kg.) |
*Specifications are subject to change without notice for further design improvements.
|
;newwin1.focus();){kind=spacer}