Aerotec Machine Tool

TLA Series /LC Series /LD Series/ LFS Series /LFM Series /LXM Series

L & L
TLA Series

L & L TLA

SPECIFICATIONS

TLA Series 1000 1500 2000 3000
30" L x W x H (mm) 3,230 x 2,500 x 2,000 3,730 x 2,500 x 2,000 4,230 x 2,500 x 2,000 5,230 x 2,500 x 2,000
N.W/G.W 9,100/10,920 kg 9,500/11,400 kg 9,900/11.880 kg 10,700/12,840 kg
34" L x W x H (mm) 3,230 x 2,500 x 2,000 3,730 x 2,500 x 2,000 4,230 x 2,500 x 2,000 5,230 x 2,500 x 2,000
N.W/G.W 9,400/11,280 kg 9,800/11,760 kg 10,200/12,240 kg 11,000/13,200 kg
38" L x W x H (mm) 3,230 x 2,500 x 2,000 3,730 x 2,500 x 2,000 4.230 x 2,500 x 2,000 5,230 x 2,500 x 2,000
N.W/G.W 9,700/11,640 kg 11,100/12,120 kg 10,500/12,600 kg 11,300/13,560 kg

MODEL TLA 30 TLA 34 TLA 38
SWING OVER BED 770 mm 870 mm 970 mm
SWING OVER CROSS SLIDE 400 mm 500 mm 600 mm
CENTER HEIGHT 390 mm 440 mm 490 mm
WIDTH OF CARRIAGE 885 mm
WIDTH OF CROSS SLIDE 350 mm
DISTANCE BETWEEN CENTERS

950 mm / 1,450 mm / 1,950 mm / 2,950 mm
CONTROL       STD.

FANUC Oi-TC
                      OPT.

FANUC 2liTB ; SIEMENS 810D ; FAGOR 8055TC
WIDTH OF BED

510 mm (20")
BED WAY

3-v way with 1 flat way
MACHINE LENGTH

3,230 mm / 3,730 mm / 4,230 mm / 5,230 mm
HEADSTOCK:
SPINDLE BORE
Ø 105 mm(4") Ø 153 mm (6") Ø 230 mm (9") Ø 305 mm (12")
SPINDLE NOSE
A2-8 A2-11 A2-15 A2-20
SPINDLE SPEED
13~1,800rpm 6.5~600rpm 6~400rpm 4~400rpm
SPINDLE CENTER

105mm / 153mm (4"/6") : MT# 5 ; 230mm / 305mm (9"/12") : MT# 6
SPINDLE POWER

18.5 /22 KW (FANUC £\i)
TURRET:
TURRET MODE            STD.

H4-250 hydraulic ; V8-388 hydraulic
                                   OPT.

H4-250 VDI hydraulic ; V8-electric (BSV-N-250-388)
 

V12-430 Hydraulic ; V12-live tooling (ODT-N-25)
TOOL SIZE

32 mm
TAILSTOCK:
QUILL DIAMETER

165 mm rotating quill
QUILL TRAVERSE

200 mm
TAILSTOCK CENTER MT # 6
BODY MOVEMENT Move by carriage
QUILL MOVEMENT Electric / Manual (STD) ; Hydraulic (OPT)
FEED:
X-AXIS RAPID TRAVERSE 6M/min Ø40 mm*P5
X-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
X-AXIS TRAVERSE 500 mm
X-AXIS SERVO MOTOR 3.0KW (FANUC £\i)
Z-AXIS RAPID TRAVERSE 6M/min Ø63 mm*p10
Z-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
Z-AXIS TRAVERSE 750mm / 1,250mm / 1,700mm / 2,700mm
Z-AXIS TRANSMITTING Directly (Coupling)
Z-AXIS SERVO MOTOR 4.0KW (FANUC £\i)
STANDARD ACCESSORIES:
LUBRICATION PUMP 25KW
COOLANT PUMP 1/2HP high pressure
HYDRAULIC PUMP 2 HP
CHIP ELIMINATING    STD. REAR CHIP CONVEYOR & FRONT CHIP AUGER
                                OPT. FRONT & REAR CHIP CONVEYOR
                                OPT. REAR CHIP CONVEYOR ONLY
GUARD                     STD. REAR SPLASH GUARD + FRONT TWO DOORS
                                OPT. FULLY ENCLOSED GUARDING

*Specifications subject to change without prior notice.

LC Series


L & L LC

SPECIFICATIONS

LC Series 4200 5200 6200 7200
30" L x W x H (mm) 6,330 x 2,500 x 2,000 7,330 x 2,500 x 2,000 8,330 x 2,500 x 2,000 9,330 x 2,500 x 2,000
N.W/G.W 12,000/14,400 kg 12,900/15,480 kg 13,800/16,560 kg 14,700/17,640 kg
34" L x W x H (mm) 6,330 x 2,500 x 2,000 7,330 x 2,500 x 2,000 8,330 x 2,500 x 2,000 9,330 x 2,500 x 2,000
N.W/G.W 12,400/14,880 kg 13,300/15,960 kg 14,200/17,040 kg 15,100/18,120 kg
38" L x W x H (mm) 6,330 x 2,500 x 2,000 7,330 x 2,500 x 2,000 8,330 x 2,500 x 2,000 9,330 x 2,500 x 2,000
N.W/G.W 12,800/15,360 kg 13,700/16,440 kg 14,600/17,520 kg 15,500/18,600 kg

MODEL LC 30 LC 34 LC 38
SWING OVER BED 770 mm 870 mm 970 mm
SWING OVER CROSS SLIDE 400 mm 500 mm 600 mm
CENTER HEIGHT 390 mm 440 mm 490 mm
WIDTH OF CARRIAGE 885 mm
WIDTH OF CROSS SLIDE 350 mm
DISTANCE BETWEEN CENTERS

4,200mm  /  5,200mm  /  6,200 mm  /  7,200mm
CONTROL       STD.

FANUC Oi-TC
                      OPT.

FANUC 2liTB ; SIMENS 810D ; FAGOR 8055TC
WIDTH OF BED

560 MM (22")
BED WAY

3-v way with 1 flat way
MACHINE LENGTH

6,330 mm / 7,330 mm / 8,330 mm / 9,330 mm
HEADSTOCK:
SPINDLE BORE
Ø 105 mm(4") Ø 153 mm (6") Ø 230 mm (9") Ø 305 mm (12")
SPINDLE NOSE
A2-8 A2-11 A2-15 A2-20
SPINDLE SPEED
13~1,800rpm 6.5~600rpm 6~400rpm 4~400rpm
SPINDLE CENTER

105mm / 153mm (4"/6") : MT# 5 ; 230mm / 305mm (9"/12") : MT# 6
SPINDLE POWER

18.5 /22 KW (FANUC £\i)
TURRET:
TURRET MODE            STD.

H4-250 hydraulic ; V8-388 hydraulic
                                   OPT.

H4-250 VDI hydraulic ; V8-electric (BSV-N-250-388)
 

V12 Hydraulic ; V12-live tooling (ODT-N-25)
TOOL SIZE

32 mm
TAILSTOCK:
QUILL DIAMETER

165 mm rotating quill
QUILL TRAVERSE

200 mm
TAILSTOCK CENTER MT # 6
BODY MOVEMENT Motorized
QUILL MOVEMENT Electric / Manual (STD) ; Hydraulic (OPT)
FEED:
X-AXIS RAPID TRAVERSE 6M/min Ø40 mm*P5
X-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
X-AXIS TRAVERSE 500 mm
X-AXIS SERVO MOTOR 3.0KW (FANUC £\i)
Z-AXIS RAPID TRAVERSE 4M~5M:6M/min Ø63mm*p10 ; 6M~7M:5M/min Ø80mm*p10
Z-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
Z-AXIS TRAVERSE 4,000mm / 5,000mm / 6,000mm / 7,000mm
Z-AXIS TRANSMITTING 1:4 gear ratio (Precision reduction gear)
Z-AXIS SERVO MOTOR 4M~5M:4KW ; 6M~7M:7KW (FANUC £\i)
STANDARD ACCESSORIES:
LUBRICATION PUMP 25KW
COOLANT PUMP 1/2HP high pressure
HYDRAULIC PUMP 2 HP
CHIP ELIMINATING    STD. REAR CHIP CONVEYOR & FRONT CHIP AUGER
                                OPT. FRONT & REAR CHIP CONVEYOR
                                OPT. REAR CHIP CONVEYOR ONLY
GUARD                     STD. REAR SPLASH GUARD + FRONT TWO DOORS
                                OPT. FULLY ENCLOSED GUARDING
*Specifications subject to change without prior notice.

LD Series

L & L LD

SPECIFICATIONS

LD Series 1300 2300 3300 4300
40" L x W x H (mm) 3,620 x 2,800 x 2,160 4,620 x 2,800 x 2,160 5,620 x 2,800 x 2,160 6,620 x 2,800 x 2,160
N.W/G.W 9,500/11,400 kg 10,700/12,840 kg 11,900/14,280 kg 13.100/15.720 kg
45" L x W x H (mm) 3,620 x 2,800 x 2,160 4,620 x 2,800 x 2,160 5,620 x 2,800 x 2,160 6,620 x 2,800 x 2,160
N.W/G.W 10,000/1,2000 kg 11,200/13,440 kg 12,400/14,880 kg 13,600/16,320 kg
48" L x W x H (mm) 3,620 x 2,800 x 2,160 4,620 x 2,800 x 2,160 5,620 x 2,800 x 2,160 6,620 x 2,800 x 2,160
N.W/G.W 10,500/12,600 kg 11,700/14,040 kg 12,900/15,480 kg 14,100/16,920 kg
LD Series 5300 6200 7200
40" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 14,300/17,160 kg 15,500/18,600 kg 16,700/20,040 kg
45" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 14,800/17,760 kg 16,000/19,200 kg 17,200/20,640 kg
48" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 15,300/18,360 kg 16,500/19,800 kg 17,700/21,240 kg

LD Series 5300 6200 7200
40" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 14,300/17,160 kg 15,500/18,600 kg 16,700/20,040 kg
45" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 14,800/17,760 kg 16,000/19,200 kg 17,200/20,640 kg
48" L x W x H (mm) 7,620 x 2,800 x 2,160 8,300 x 2,800 x 2,160 9,300 x 2,800 x 2,160
N.W/G.W 15,300/18,360 kg 16,500/19,800 kg 17,700/21,240 kg

MODEL LD 40 LD 45 LD 48
SWING OVER BED 1,020 mm 1,120 mm 1,220 mm
SWING OVER CROSS SLIDE 650 mm 750 mm 850 mm
CENTER HEIGHT 525 mm 575 mm 625mm
WIDTH OF CARRIAGE 950 mm
WIDTH OF CROSS SLIDE 400 mm
DISTANCE BETWEEN CENTERS

900mm / 1,900mm / 2,900mm / 3,900mm / 4,900mm / 6,300mm / 7,300mm 

CONTROL       STD.

FANUC Oi-TC
                      OPT.

FANUC 2liTB ; SIMENS 810D ; FAGOR 8055TC
WIDTH OF BED

610mm(24")
BED WAY

3-v way with 1 flat way
MACHINE LENGTH

3,620mm / 4,620mm / 5,620mm / 6,620mm / 7,620mm / 8,300mm / 9,300mm
HEADSTOCK:  
SPINDLE BORE
Ø 153 mm(6") Ø 230 mm (9") Ø 305 mm (12") Ø 365 mm (14.5") Ø405 mm (16") Ø505 mm(20")
SPINDLE NOSE
A2-11 A2-15 A2-20 A2-20 A2-28 A2-28
SPINDLE SPEED
9~600rpm 9.5~450rpm 4~400rpm 6~300rpm 5~250rpm 5~220rpm
SPINDLE CENTER

153mm(6") : MT#5 ; 230mm/305mm/365mm/405mm/505mm (9"/12"/14.5"/16"/20"):MT#6
SPINDLE POWER

1M~3M:18.5/22KW ; 4M~7M:22/26 KW (FANUC £\i)
TURRET:  
TURRET MODE            STD.

H4-350 hydraulic ; V8-483 hydraulic
                                   OPT.

H4-350 VDI hydraulic ; V8-electric (BSV-N-250-430)
 

V12-live tooling (ODT-N-25)
TOOL SIZE

32 mm (STD) ; 40 mm (OPT)
TAILSTOCK:  
QUILL DIAMETER

165 mm rotating quill
QUILL TRAVERSE

250 mm
TAILSTOCK CENTER MT # 6
BODY MOVEMENT Motorized
QUILL MOVEMENT Electric / Manual (STD) ; Hydraulic (OPT)
FEED:  
X-AXIS RAPID TRAVERSE 1M~3M:6M/min Ø40mm*P5 ; 4M~7M:5M/min Ø40mm*P5
X-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
X-AXIS TRAVERSE 650 mm
X-AXIS SERVO MOTOR 3.0KW (FANUC £\i)
Z-AXIS RAPID TRAVERSE 1M~3M:6M/min Ø63mm*p10;4M~5M:5M/min Ø63mm*p10 ; 6M~7M:4M/min Ø80mm*p10
Z-AXIS FEED RANGE 0.1 mm/min ~ 3000 mm/min
Z-AXIS TRAVERSE 750mm / 1,750mm / 2,750mm / 4,100mm / 5,100mm / 6,100mm / 7,100mm
Z-AXIS TRANSMITTING 1~3M:Directly (Coupling) ; 4~7M: ; 1:4 gear ratio (Precision reduction gear)
Z-AXIS SERVO MOTOR 1M~5M:4KW ; 6M~7M:7KW (FANUC £\i)
STANDARD ACCESSORIES:  
LUBRICATION PUMP 25KW
COOLANT PUMP 1/2HP high pressure
HYDRAULIC PUMP 2 HP
CHIP ELIMINATING    STD. REAR CHIP CONVEYOR & FRONT CHIP AUGER
                                OPT. FRONT & REAR CHIP CONVEYOR
                                OPT. REAR CHIP CONVEYOR ONLY
GUARD                     STD. REAR SPLASH GUARD + FRONT TWO DOORS
                                OPT. FULLY ENCLOSED GUARDING

*Specifications subject to change without prior notice.

For more information please call AEROTEC

LFS Series

SPECIFICATIIONS

MODEL LFS 1400 LFS 1600 LFS 1800
Swing over bed (V shape carriage) 1420 mm 1620 mm 1820 mm
Swing over cross slide (Box type carriage) 900 mm 1100 mm 1300 mm
Center height 750 mm 850 mm 950 mm
Spindle bore 200 mm
Spindle nose ASA-A2-15
Spindle speed

4-400 RPM (4 steps speed change)

Spindle center

 MT#6
Width of carriage 1000 mm

Width of cross slide

 400 mm
Turret  H4-350 (STD) H4-350-VDI(OPT)

Tool size

40 mm

X axis travel

 1000 mm
Z axis travel 1800
X axis rapid traverse 5000 mm/min
Z axis rapid traverse 5000 mm/min
X axis transmitting system Ø40 mm*P5 (ballscrew)
Z axis transmitting system Ø40 mm*P5 (ballscres) Equipped with1:4 precision gear reducer
X axis servomotor

4 Kw

Z axis servomotor

4 Kw
Bed width 1016 mm (40")

Chip removing

 Front chip auger + Rear chip conveyor (STD)

Machine length

 5700 mm
Spindle motor 22/26 Kw (STD) 30/37 Kw (OPT)
Lubrication pump 25 W
Coolant system 1/2 HP High pressure
Hydraulic pump 2 HP
Note:
1. Machine equipped with different turrets will lead to differences on X and Z axis traverse.
2. Machine equipped with different motors will lead to differences on spindle speed.
3. Different tailstock types will affect Z axis travel.
4. Machine length does not include the length of chip conveyor.
5. Control: Fanuc 0i-TC (Standard), Siemens 810-D (Optional)
6. The above specification is only for reference; the actual specification is based on the contract signed between two parties.

Machine Dimensions and Weight
LFS Series 2000
1400 L x W x H (in) 5850 x 3630 x 2710
N.W/G.W 17000/19000kg
1600 L x W x H (in) 5850 x 3630 x 2810
N.W/G.W 17500/19500kg
1800 L x W x H (in) 5850 x 3630 x 2910
N.W/G.W 18000/20000kg

*Specifications subject to change without prior notice.

LFM Series

SPECIFICATIONS

MODEL LFM 1400 LFM 1600
Swing over bed (V shape carriage) 1420 mm 1620 mm
Swing over cross slide (Box type carriage) 900 mm 1100 mm
Center height 750 mm 850 mm
Spindle bore 3000/4000/5000/6000/7000/8000/9000/10000 mm
Spindle nose ASA-A2-15
Spindle speed

4-400 RPM (4 steps speed change)

Spindle center

 MT#6
Width of carriage 1000 mm

Width of cross slide

 400 mm
Turret H4-350-VDI Hydraulic or V8-200 Hydraulic

Tool size

40 mm

X axis travel

 1000 mm
Z axis travel 2750/3750/4750/5750/6750/7750/8750/9750 nn
X axis rapid traverse 3M~5M: 5000 mm/min ; 6M~10M: 4000 mm/min
Z axis rapid traverse 3M~5M: 5000 mm/min ; 6M~10M: 4000 mm/min
X axis transmitting system Ø40 mm *P5 (ballscrew)
Z axis transmitting system 3-6M Ø80mm*P10 (ballscrew) Direct coupling with1:4precision gear reducer
7-8M Ø80mm*P10 (ballscrew) rotating nuts with1:2 precision gear reducer
9-10M precision pinion (linear scale is installed)
X axis servo motor

4 Kw

Z axis servo motor

 3M~6M: 7 Kw ; 7M~10M: 12.7 Kw
Tailstock quill diameter 250 mm rotating quill
Tailstock movement Elcetric / Manual
Tailstock travel 250 mm
Tailstock boy movement Transmitted by gear reducer
Tailstock quill MT#6
Bed width 1016 mm (40")

Chip removing

 Front chip auger + Rear chip conveyor ( STD)
Front +Rear chip conveyor( OPT, only available for 3-6M)

Machine length

 6700/7700/8700/9700/10700/11700/12700/13700 mm
Spindle motor 3M-6M:Ac-30/37Kw(STD) / Ac-37/45Kw(OPT) Fanuc 0i-TC Motor
7M-10M: Ac-51/77Kw (OPT) Siemens 810D
Lubrication pump 25 W (2 pumps)
Coolant system 1/HP High pressure (STD) / Compressed air dryer (OPT)
Hydraulic pump 2 HP
Note:
1. Machine equipped with different turrets will lead to differences on X and Z axis traverse.
2. Machine equipped with different motors will lead to differences on spindle speed.
3. Different tailstock types will affect Z axis travel.
4. Machine length does not include the length of chip conveyor.
5. Control: Fanuc 0i-TC (Standard), Siemens 810-D (Optional)
6. The above specification is only for reference; the actual specification is based on the contract signed between two parties.

LFM Series 3000 4000 5000 6000
1400 L x W x H (in) 6020 x 3220 x 3470 7020 x 3220 x 3470 8020 x 3220 x 3470 9020 x 3220 x 3470
N.W/G.W 24500/27500kg 26500/29600kg 28600/31800kg 30800/34100kg
1600 L x W x H (in) 6020 x 3220 x 3570 7020 x 3220 x 3570 8020 x 3220 x 3570 9020 x 3220 x 3570
N.W/G.W 25500/28500kg 27700/30800kg 29300/32500kg 31200/34500kg
LFM Series 7000 8000 9000 10000
1400 L x W x H (in) 10020 x 3220 x 3470 11020 x 3220 x 3470 12020 x 3220 x 3470 13020 x 3220 x 3470
N.W/G.W 33100/36500kg 35500/38000kg 37000/40600kg 39600/43300kg
1600 L x W x H (in) 10020 x 3220 x 3570 11020 x 3220 x 3570 12020 x 3220 x 3570 13020 x 3220 x 3570
N.W/G.W 34600/38000kg 37100/40600kg 38700/42300kg 41400/45100kg

*Specifications subject to change without prior notice.

LXM Series

SPECIFICATIONS

MODEL LXM 1800
Swing over bed (V shape carriage) 1820 mm
Swing over cross slide (Box type carriage) 1300 mm
Center height 950 mm
Distance between centers 3050/4050/5050/6050/7050/8050/9050/10050 mm
Spindle bore 200 mm
Spindle nose ASA-A2-15
Spindle speed

4-400 RPM (4 steps speed change)

Spindle center

 MT#6
Width of carriage 1000 mm

Width of cross slide

 400 mm
Turret H4-450-VDI Hydraulic or V8-200 Hydraulic

Tool size

40 mm

X axis travel

 1000 mm
Z axis travel 2750/3750/4750/5750/6750/7750/8750/9750 nn
X axis rapid traverse 4000 mm/min
Z axis rapid traverse 4000 mm/min
X axis transmitting system Ø40 mm *P5 (ballscrew)
Z axis transmitting system 3-6M Ø80mm*P10 (ballscrew) Direct coupling with1:4 precision gear reducer
7-8M Ø80mm*P10 (ballscrew) Rotating nuts with1:2 precision gear reducer
9-10M precision pinion
X axis servo motor

8.7 Kw

Z axis servo motor

 12.7 Kw
Tailstock quill diameter 250 mm rotating quill
Tailstock travel 250 mm
Tailstock boy movement Transmitted by gear reducer
Tailstock movement Elcetric / Manual
Tailstock quill MT#6
Bed width 1116 mm (44")

Chip removing

 Front chip auger + Rear chip conveyor ( STD)
Front +Rear chip conveyor( OPT, only available for 3-6M)

Machine length

 6700/7700/8700/9700/10700/11700/12700/13700 mm
Spindle motor 3M-6M:  37/45Kw(STD) / 7M-10M:  51/77Kw (OPT)
Lubrication pump 25 W
Coolant system 1/HP High pressure
Hydraulic pump 2 HP
Note:
1. Machine equipped with different turrets will lead to differences on X and Z axis traverse.
2. Machine equipped with different motors will lead to differences on spindle speed.
3. Different tailstock types will affect Z axis travel.
4. Machine length does not include the length of chip conveyor.
5. Control: Fanuc 0i-TC (Standard), Siemens 810-D (Optional)
6. The above specification is only for reference; the actual specification is based on the contract signed between two parties.

LXM Series 3000